Basic Installation instructions

Setting up Dial-up Networking

1. Find out what version of Windows you have. If you have Windows 98, continue. If you have some other version, check out the other setup guides.
2. Double-click on the My Computer icon on the Desktop.
3. Double-click on Dial-Up Networking
4. If there are any other icons than Make New Connection, ask the user if they use them. If they don't know assume not and delete them. To delete: Right-click on the icon and choose delete. Click Yes
5. Double-click on the Make New Connection icon
6. In the Type a name for the computer you are dialing: box, type pennswoods
7. Click Next
8. In the Telephone number: box, type the local pennswoods.net modem dial-up number. Don't put anything in the area code box!
9. Click Next
10. Click Finish
11. Right-click on the pennswoods icon
12. Click Properties
13. On the General tab, about half way down the window, Uncheck the Use area code and dialing properties checkbox.
14. Click on the Server Types tab at the top of the window
15. Uncheck Log onto network
16. Uncheck NetBEUI, towards the bottom of the screen
17. Uncheck IPX/SPX Compatible
18. Click OK
19. Close the Dial-Up Networking window.

Configuring Internet Explorer

	Internet Explorer 4. Comes with Windows 98
	Internet Explorer 5. Comes with Windows 98SE. May be found on Win98 if upgraded.

Configuring Internet Explorer 4

1. Right-click on the Internet Explorer icon on the Desktop
2. Click on Properties
   • If this icon is not here, go to Start, Settings, Control Panel. This will open the Control Panel
   • Double-click on the Internet Options icon. (It looks like a little globe with a wrench and hammer.)
   • Continue...
3. On the General tab (the first one that opens), In the Homepage box, in the Address: box, type www.pennswoods.net This can actually be any web address.
4. Click on the Connection tab
5. Check the circle beside Connect to the Internet using a modem
6. Click on the Settings button right next to it.
7. In the drop menu below Use the following Dial-Up Networking Connection: select pennswoods by clicking on the arrow and clicking on pennswoods
8. On the same window, type your user name into the User: box
9. Type your password into the Password: box
10. Click OK
11. Click Apply
12. Click OK
    • Close the Control Panel
13. Start Internet Explorer by double-clicking on the icon on the Desktop or going to Start, Programs, Internet Explorer. If it's not in either place, refer it to tech support.
14. When the Connect to window comes up, click Work Offline or Cancel or just close the window.
15. Close the Internet Explorer window
16. Skip to the Outlook Express setup

Configuring Internet Explorer 5

1. Right-click on the Internet Explorer icon on the Desktop
2. Click on Properties
   • If this icon is not here, go to Start, Settings, Control Panel. This will open the Control Panel
   • Double-click on the Internet Options icon. (It looks like a little globe with a wrench and hammer.)
   • Continue...
3. On the General tab (the first one that opens), In the Homepage box, in the Address: box, type www.pennswoods.net This can actually be any web address.
4. Click on the Connection tab
5. Click in the circle beside Always dial using my default connection
6. In the white box labelled Dial-up settings, check if pennswoods is listed. If it is, does it say (Default) beside it?
7. If not, click on pennswoods then click on the Set Default button
8. Click on the Settings button. A new window called pennswoods settings will open.
9. In the User name: type your Pennswoods user name
10. In the Password: box, type your password
11. Click OK
12. Click Apply
13. Click OK
    • Close the Control Panel
14. Start Internet Explorer by double-clicking on the icon on the Desktop or going to Start, Programs, Internet Explorer. If it's not in either place, refer it to tech support.
15. When the Connect to window comes up, click Work Offline or Cancel or just close the window.
16. Close the Internet Explorer window
17. Skip to the Outlook Express setup

Configuring Outlook Express

	Internet Mail. Comes with Windows 95, will only be found on Win95 without Outlook Express (and probably with Internet Explorer 3). Recommend upgrade to a newer version.
	Outlook Express 4. Comes with Internet Explorer 4 on Windows 98. May be found on Windows 95 if upgraded.
	Outlook Express 5. Comes with Internet Explorer 5 Windows 98SE, Windows 2000, and Windows ME. May be found on Win95 or 98 if upgraded.

Configuring Outlook Express 4 & 5

1. Double-click on the Outlook Express icon on the Desktop.
   • Click on Start, Programs, Outlook Express. If it's not there, check to see if there's an Internet Explorer folder. It may be in there. If not, refer it to tech support.
2. Setup can go two ways from here.
   
   => If you're prompted for your user name, continue here. If you're prompted make a new connection, you skipped a step.Otherwise, skip to the next section.
   
   
   1. In the Display name: box, type your real name
   2. Click Next
   3. In the Email address: box, type your email address. Type it in the form username@pennswoods.net
   4. Click Next
   5. This screen should say My incoming mail server is a [POP3] server
   6. In the Incoming mail (POP3 or IMAP) server: box, type mail.pennswoods.net
   7. In the Outgoing mail (SMTP) server: box, type mail.pennswoods.net
   8. Click Next
   9. In the POP Account name: box, type your user name
   10. In the Password: box, type your password
   11. Click Next
       Outlook Express 4 only:
       • Click Next
       • Click in the circle beside I Will establish my internet connection manually
       • Click Next
   12. Click Finish
   13. Close Outlook Express
   
   => If the main Outlook Express screen comes up, skip to here from the previous section beginning.
   
   
   1. If you're prompted with the Connect to window, click Work Offline, Cancel or just close the window.
   2. If you get any error windows, click the Hide button
   3. Click on Tools at the top of the screen
   4. Click on Accounts
   5. Click on the Mail tab
      • If there are any account listed in the Accounts column, you may delete them by clicking on the account you want to delete, then clicking on the Remove button.
   6. Click on the Add button
   7. Click on Mail
   8. In the Display name: box, type your real name
   9. Click Next
   10. In the Email address: box, type your email address. Type it in the form username@pennswoods.net
   11. Click Next
   12. This screen should say My incoming mail server is a [POP3] server
   13. In the Incoming mail (POP3 or IMAP) server: box, type mail.pennswoods.net
   14. In the Outgoing mail (SMTP) server: box, type mail.pennswoods.net
   15. Click Next
   16. In the POP Account name: box, type your user name
   17. In the Password: box, type your password
   18. Click Next
   19. Click Next
   20. Click in the circle beside I will establish my internet connection manually
   21. Click Next
   22. Click Finish
   23. Close Outlook Express
   
   
3. That's all for Outlook Express