-
Unplug the telephone line
from the WebTV unit. (Trust me.)
-
Start up your WebTV. You'll
be presested with the Connecting to WebTV screen
-
The WebTV will now try to
dial. Since the line is unplugged, you'll get an error: Your WebTV
receiver is having trouble connecting. Try again in a few minutes.
You'll be presented with three options: [Explain] [Options] [Try Again].
Select Options
-
The WebTV will then open a
Dialing Options screen. Select Use your ISP
If it is not here, contact WebTV about enabling OpenISP.
-
You may be presented with
a screen titled Using your own ISP. At the end, select Use your ISP
-
Otherwise, the next screen
will be titled Using your own ISP. Check the box labelled Check this
box and fill in the blanks...
-
In the Internet Service Provider
name box, type pennswoods
-
In the Login name box, type
your Pennswoods.net user name
-
In the Password box, type
your password
-
In the Primary modem number
box, type your local dial-up number
-
In the Backup modem number
box, type the same number
-
Select Done at the bottom
of the screen
-
Reconnect the telephone line
into the back of the WebTV.
-
Click on Connect in the lower
right corner of the screen. You WebTV should now connect to Pennswoods.net
