|
|
|
|
|
|
|
|||||||
797 - The modem could not be found.
This is a Win2K issue with DUN. To attempt to correct it:
- Try rebooting. This will very often do the trick.
- Try Mcrosoft's solution:
- Alleged cause: "This behavior can occur because the original drivers for the dial-up adapters are not supported under Windows 2000."
- Alleged resolution: "To resolve this behavior, update the drivers."
- Click Start, Settings, Control Panel.
- Double-click on the System icon
- Click the Hardware tab
- Click the Device Manager button
- CLick on the plus beside Network Adapters
- Right-click RAS Async Adapter
- Click on the Properties button
- Click Update Driver
- Windows will report that the correct driver is already installed and will prompt you to either reinstall the driver or exit.
- Click Reinstall
- Run the Dial-up Networking Wizard again